INTE ELECTRIC

Showing 51 - 60 of 92, total 10 pages [First] [Previous] [Next] [Last]

thermal relay
Specification: LR1¡¢LR2 SERIES
Detail: 1.INTRODUCTION AND APPLICATION JRS1(LR1-D)series thermal relay is suitable for using in the circuits rated voltage up to 660V, rated current 93A AC 50HZ or 60HZ, for over-voltage protection of A. C. Motor. The telay has the di...

ac contactor
Specification: CJX2 (LC1-D) SERIES
Detail: ¢ñ¡¢APPLICATION CJX2(LC1-D)series AC contactor)simplified as contactor in the following)is suitable for using in the circuits up to the rated voltage 660V AC 50HZ or 60HZ, rated current 95A, for making and breaking an frequent...

ac contactor
Specification: CJX1 (3TB 3TF) SERIES
Detail: 1.APPLICATION CJXI (3TB 3TF) series AC contactors are suitable for frequency 50/60HZ, rated insulation voltage up to 1000V, rated operation current 9-475A under AC-3 duty. It is mainly used for making/breaking electric circuit...

over voltage protector
Specification: INT (G)
Detail: 1.APPLICATION ENVIRONMENT -45¡æ~+50¡æ -45¡æ~+50¡æ 2.INSTALLATION With TH35 standard conduit, put in & out and "N" wire installed according to the indicated marks 3.SPECIFICATION

overload protector
Specification: IM-003
Detail: 1.APPLICATION The items is used for overload protection in 50/60HZ,and 12VDC/125VAC circuit. The current is up to 9A. it applies in the paper crumbling machine and other motor. 2.Acting characteristics

overload protector
Specification: IM-002
Detail: 1.APPLICATION IM-002 mini switch is used in AC 50/60HZ, and rated voltage 125/250V circuit. The rated current up to 15A max. The item has function of switch and over current protector. It has the widely application in regulato...

over load protector
Specification: IM-001
Detail: 1.APPLICATION IM-001 overload protector is used for overload protection in circuit of AC50 or 60HZ, rated voltage 125/250V. rated current up to 15A. 2. working environment 1. the altitude not exceeding 2000m; 2. the relati...

isolator
Specification: IT10-100
Detail: .APPLICATION The items can switch on, load and break the current under normal conditions.For uses as switch disconnectors. The items comply with IEC 60947-3.GB14048.3 standard. Connection :Rigid conductor 50 mm2 Flexible c...

isolator
Specification: INH-100
Detail: APPLICATION This item of breaker can switch on, load and break the current under normal conditions, using as switch disconnectors.The items comply with IEC 60947-3,GB 14048.3 Rigid conductor 25mm2 Connection :40,63,80A fle...

leakage circuit breaker
Specification: IN18
Detail: APPLICATION: Residual Current Circuit Breaker provide the function of isolation switching and earth leakage protection of electrical circuits.And also provide The indirect protection of the operator's body against the danger...


Showing 51 - 60 of 92, total 10 pages [First] [Previous] [Next] [Last]
1 2 3 4 5 6 7 8 9 10